User manual for single-phase meter
60
24 Scrap Processing
This chapter describes the right method of meter scrap processing.
According to ISO 14001 environmental certification specification, the components of the
meter is separable, therefore you can send the corresponding abandoned and recycling station
after disassembled.
Attention: meter scrap processing should comply to local waste and
environmental protection laws and regulations.
Meter can be disassemble into different parts, the recommended waste treatment methods
are as follows:
Parts Recommend scrap processing method
PCB board Electronic waste, scrap according to local regulations
Metal parts, including iron part of
optical communication, terminal
connection copper bar, internal
current cables etc.
Provided to the metal material recycling
Plastic Recycle bin for plastic materials, otherwise can burn
To Next Page
Loading...
