HEXING HXE110 - Overview

User manual for single-phase meter
1
1 Overview
The HXE110 single-phase smart meter is design for measuring the import and export active
energy, import and export reactive energy, maximum demand and instantaneous parameters. It
supports contract management, multi-tariff, monthly billing, daily billing, load profile, event
detection, neutral measurement (optional) and supply control etc. A modular-designed
communication module can be GPRS module, or 3G module, or 4G module, or PLC module, or RF
module (optional) which supports plug and play while doesn’t need to power off the meter.
Main Features
 Pluggable modules
 Wide scope of operate voltage
 LCD display with large 8 digits.
 Back-up power supply, so can support display available in case of power failure.
 Display button allows checking the LCD display items and changing the LCD display mode.
 With open protocols: DLMS/COSEM.
 Communication encryption ensures data transmission safety.
 Local and remote firmware upgrade.
 With internal relay control, control load by parameter configuration and communication
command.(only for DC meter)
 IP54 water and dust protection grade.
 Class II protection grade.
 Real-time clock.
 Various events detection and record including under voltage, over voltage, programming,
password setting and time setting.
 Bypass, magnetic, phase reverse, etc. detection for tampering-proof.
 Prepayment functionality that enables secure revenue collection.
 Open, secure and reliable STS/CTS prepayment standard that allows all existing vending
channels to be used.