User manual for single-phase meter
3
3 Standards Compliance
Standard Description
IEC 62052-11
Electricity metering equipment (AC.)
– General requirements, tests and test conditions
– Part 11: Metering equipment
IEC 62053-21
Electricity metering equipment (AC.)
–Particular requirements
–Part 21:Static meters for active energy(classes 1 and 2)
IEC 62053-23
Electricity metering equipment (AC)
– Particular requirements
– Part 23: Static meters for reactive energy (classes 2 and 3)
IEC 62052-21
Electricity metering equipment (AC)
– General requirements, tests and test conditions
– Part 21: Tariff and load control equipment
IEC 62056-21
Electricity metering
- Data exchange for meter reading, tariff and load control
– Part 21: Direct local data exchange
IEC62056-42
Electricity metering
– Data exchange for meter reading, tariff and load control
– Part 42:Physical layer services and procedures for connection-
oriented asynchronous data exchange
IEC62056-46
Electricity metering
– Data exchange for meter reading, tariff and load control
– Part 46: Data link layer using HDLC protocol
IEC62056-47
Electricity metering
– Data exchange for meter reading, tariff and load control
– Part 47:COSEM transport layer for IP networks
IEC62056-53
– Data exchange for meter reading, tariff and load control
– Part 53:COSEM Application layer
IEC62056-61
Electricity metering
– Data exchange for meter reading, tariff and load control
– Part 61:OBIS Object identification system
IEC62056-62
Electricity metering
– Data exchange for meter reading, tariff and load control
– Part 62:Interface classes
To Next Page
