HEXING HXE110 - 18.2 RS485 Interface (optional); 18.3 PLC Communication (optional); 18.4 Wisun Communication (optional); 18.5 4 G Communication

User manual for single-phase meter
45
18.2 RS485 interface(optional)
Communication protocol: DLMS HDLC or IEC62056-21 E mode, default is DLMS HDLC.
Baud rate: 300~9600 bps (configurable), default is 9600bps. Data bits is 8, none parity.
18.3 PLC Communication (optional)
 Baud rate: 9600bps, 8 data bits, no check bit.
 Compliant with the DLMS standard (direct HDLC mode).
 The utility can read and set the meter via the master station.
 The module supports plug and play.
 Support events report autonomously.
18.4 Wisun Communication (optional)
 Baud rate: 9600bps, 8 data bits, no check bit.
 Compliant with the DLMS standard (direct HDLC mode).
 The utility can read and set the meter via the master station.
 The module supports plug and play.
 Support events report autonomously.
18.5 4G communication
Communication standards: DLMS/COSEM, TCP/IP
4G module online mode:
 Always online mode: module will be online all time
 Time period online mode: module will be online at preset period
 Passive activation online mode: module will be online just under SMS or call active message
 On demand online mode: module supports both time period online and passive activation
mode
4G module supports client mode and server mode.