Heyer LUVAR A - Changing the Device Language; Setting the Time Parameters; Setting an Alarm Clock

Patient settings
Page 43
heyer_LUVAR_UserManual_EN-3_CRev-1
Parameter
Setting range
Standard
Description
Device info electronic
instructions for
use for patients
Serial number
Software version
GUILIB Ver.
MOT Ver.
HUMI Ver.
Here you will find the link to download the
current instructions for use as a PDF.
device serial number
software version
graphics library version
motor firmware version
humidifier firmware version
Changing the device language
If your national language is not set, you can change the device language as follows.
1. In the home screen, touch the right button (“Settings”) or select it with the
rotary knob.
2. In the “Settings” menu, touch the second line (“Device”) or select it with the
rotary knob.
3. In the “Device” menu, touch the second line (“Language”) or select it with the
rotary knob.
4. Select the desired language using the arrows or the rotary knob and confirm
the selection.
Setting the time parameters
From the home screen, select the “Settings” button and navigate to “Time & Date”
on the “Settings” screen.
Setting an alarm clock
On the “Time & Date” screen, select the “Alarm Clock” menu item. You can set up
to four alarm times here. You can choose from one of four preset names for each
alarm time.
Note: When an alarm time is active, the alarm clock icon is displayed in the
icon bar.