Product description
Page 16
heyer_LUVAR_UserManual_EN-3_CRev-1
The LUVAR STA is a respiratory therapy device that alternates between different
pressure levels for inhalation and exhalation (BiLevel). This change between pres-
sure levels can be controlled by the patient’s breathing pattern or by time.
The pressure levels are set to specific values by the physician in the standard
modes. Alternatively, it is possible for the physician to specify upper and lower
pressure limits in the “Auto” modes, when the device sets the pressure according to
events.
Note: On the following pages, all pressures are specied in hPa. Use the following
table to convert to mbar and cmH
2
O:
Pressure hPa mbar cmH
2
O
1 hPa - 1 1,02
1 mbar 1 - 1,02
1 cmH
2
O 0,98 0,98 -
Product description
Front of device
To Next Page
Loading...
