4.5.4 Switching to automatic IP address mode
1. Click Network from any web page of the printer.
2. Select Obtain an IP address automatically to enable the DHCP/BOOTP, which automatically assigns
the network settings.
Even with this option selected, you can enter Stored Settings, and the Stored Settings remain in
memory.
Note: This is the default method.
3. Click Submit to save this setting.
4. Log in as a root user if you are prompted.
Note: Changes in settings are only accepted after you have successfully logged in.
5. Reboot the printer to save this change.
18 July 2019
Ethernet web pages - standard procedures L001675, 1.2
To Next Page
Loading...
Need help?
General
