4.9.6 Upgrading the main firmware
The Upgrade page allows you to upload new firmware to the printer. For the printer/encoder, this Upgrade
page provides for upgrading the main printer firmware which includes the print server firmware.
It is only available to the printer after the printer has been rebooted into the upgrade mode.
1. Click Administration.
2. Go to Step 7 if the Upgrade button is shown.
3. Click Reboot if the Upgrade button is not shown.
38 July 2019
Ethernet web pages - standard procedures L001675, 1.2
To Next Page
Loading...
Need help?
General
