Section 4
4 Ethernet web pages - standard procedures
4.1 Web page security
You can use the web pages from your Ethernet-connected printer to view several attributes about the
printer. You must have administrative rights and enter the correct password to alter settings of the printer.
4.2 Logging in
When you attempt to change any setting, you are prompted for a user name and password.
1. Enter the User name:
n The default administrative user name is root.
n The default non-administrative user name is guest.
n Non-administrative users can only view settings.
2. Enter the Password:
n HDP®5000 and HDP8500: The default password is idcard.
n See Password page procedure for changing passwords.
3. Press Enter or click OK.
4. If the name and password is not accepted, another log in prompt is displayed on the screen.
Note: Repeat this procedure with the correct user name and password.
July 2019 13
To Next Page
Loading...
Need help?
General
