4.8.2 Selecting the log type
1. Click System Log.
2. Click the link for the log name you want to view or configure (the default choices are log1 or log2).
3. Select the Print Job Started check box to generate the log entries for each Print Job Started.
4. Select the Printer Error check box to generate the log entries for each printer error.
5. Click Submit.
6. Log in as a root user if you are prompted.
Note: Changes in settings are only accepted after you have successfully logged in.
July 2019 29
L001675, 1.2 Ethernet web pages - standard procedures
To Next Page
Loading...
