4.9.5 Reset the Default Settings
The Reboot page allows you to restart the Ethernet print server in a default mode. This transaction simply
restarts the printer in a different state, temporarily ignoring the settings in memory.
1. Click Administration.
2. Log in as a root user (using the password) if you are prompted.
Note: Changes in settings are only accepted after you have successfully logged in.
3. Click Reboot.
4. Click Default.
5. Click Yes when prompted.
6. Wait for the printer to reboot and display the Home page.
July 2019 37
L001675, 1.2 Ethernet web pages - standard procedures
To Next Page
Loading...
