4.8.3 Selecting the log destination
Specify one destination for the log.
Note: This selection does not include event logging.
1. Click System Log.
2. Click the link for the log name you want to view or configure (the default choices are log1 or log2).
3. Select the None option when a log is not required. This is the default,
4. Click Submit.
5. Log in as a root user if you are prompted. Changes in settings are only accepted after you have
successfully logged in.
30 July 2019
Ethernet web pages - standard procedures L001675, 1.2
To Next Page
Loading...
