4.7.2 Printer page 25
4.8 System Log page 27
4.8.1 Changing the log name 28
4.8.2 Selecting the log type 29
4.8.3 Selecting the log destination 30
4.8.4 Setting up email event logging 31
4.8.5 Specifying UDP event logging 32
4.8.6 Specifying TCP event logging 33
4.9 Administration pages 34
4.9.1 Using the system information page 34
4.9.2 Changing the root password 35
4.9.3 Reboot pages 36
4.9.4 Rebooting the printer 36
4.9.5 Reset the Default Settings 37
4.9.6 Upgrading the main firmware 38
4.10 Using the Help page 41
4.11 Accessing the Ethernet status LEDs 41
4.11.1 Reviewing the printer LED Table 41
4.12 Restoring the factory settings for Ethernet 41
4.12.1 Resetting the printer settings 41
4.12.2 Changing the printer LCD network settings 41
4.12.3 Accessing the network setup menu 42
4.12.4 Changing the DHCP setting 42
4.12.5 Changing the ANEG setting 42
4.12.6 Saving addresses 43
4.12.7 Resetting passwords 43
4.13 Ethernet printer troubleshooting procedures 43
4.13.1 Accessing the IP address of your printer 43
4.13.2 Verifying the printer connection 43
4.13.3 Verifying the printer IP address 44
4.13.4 Verifying that your PC can access the printer using the ping command 45
4.13.5 Printing a test page 45
A References 47
A.1 Frequently asked questions 47
A.2 Glossary of Terms 51
4 July 2019
L001675, 1.2
To Next Page
Loading...
Need help?
General
