HID HDPii - Page 106

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
106
Telnet Command Command Purpose Command Format
lpq Display information about
print jobs and their settings.
list lpq
Printer Display information about
the Printer (i.e., model
number, Firmware version
and serial number).
list printer
Printer sm Display information about
the secure mark settings of
the Printer.
list printer sm
set sysinfo contact Set the contact string. set sysinfo contact
[<STRING>]
location Set the location string. set sysinfo location
[<STRING>]
label Set the label string. set sysinfo label
[<STRING>]
from Set all strings from default or
current settings.
set sysinfo from
default|current
syslog name Change the name of a
system log path
set syslog <LOG_NAME>
name <NEW_NAME>
type Change the type of a system
log path. This starts or stops
logging on start of jobs or on
faults.
set syslog <LOG_NAME>
type [[-]job] [[-]pfault]
dest Change the destination of a
system log path. This may
be set to none, e-mail, udp
or tcp.
set syslog <LOG_NAME>
dest none|email|udp|tcp
email Change the e-mail address
for e-mail notification for a
system log path. It must
specify a valid e-mail
address.
set syslog <LOG_NAME>
email <EMAIL>
udp Specify the IP address of the
UPD system logging
program.
set syslog <LOG_NAME>
udp <IPADDRESS>
from Restore system log path set syslog from