HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
63
11
You have completed this procedure.
Printing a Test Print Image
Step Procedure
1 Install a YMCK, YMCKI or YMCKK Ribbon in the Printer for the Test Print.
2 Open the Driver settings.
a. From your computer’s startup menu, select Settings > Printers and Faxes
b. Double click on the HDPii Card Printer under the Printer’s window.
c. Select Printing Preferences under the Printer drop-down menu. (Note: This
will bring up the HDPii Printing Preferences window.)
3
a. Select the Card tab, and then click on the Test Print button, as shown in
Display A on the below.
b. When the Test Print button is selected, an image is copied to the Printer.
4 This completes the HDPii High Definition Card Printer/Encoder Installation
Guide.
To Next Page
Loading...
