HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
286
Cleaning the Magnetic Encoder when installed in the HDPii Output
Module
Step Procedure
1 Open the front cover of the Output Module. Unlock and open the Top cover.
2 Remove the Magnetic Cleaning Card ( D900589) from the wrapper.
3 The Magnetic Head is located underneath the Flipper Table.
Start by tilting the Flipper Table so it is Up & Down.
Turn the Flipper Table slightly to the LEFT so the cleaning card is at an angle
and will reach into the magnetic assembly.
To Next Page
Loading...
