HID HDPii - Using the ASCII Offset dropdown list

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
215
• Select 7 Bits to change the bits per character to 7 BPC. (Note: This is
the default for Track 1).
OR
• Select 8 Bits to change the bits per character to 8 BPC.
Using the ASCII Offset dropdown list
Use this option to customize the Character ASCII Offset used to encode the Magnetic data
on the currently selected track. (Note: This character-offset value is subtracted from the
ASCII value of each Magnetic Stripe data character prior to encoding on the track.)
Step Procedure
1
• Select NULL to change the ASCII Offset to NULL.
OR
• Select SPACE to change the ASCII Offset to SPACE. (Note: This is the
default for Track 1.)
OR
• Select ZERO to change the ASCII Offset to ZERO. (Note: This is the
default for Tracks 2 and 3.)
Using the Bit Density dropdown list