HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
283
Cleaning Procedures
Cleaning inside the Printer
Step Procedure
1 Open the Front Cover.
2 Remove the Print Ribbon and HDP transfer Film from the Printer.
3 If you have a can of compressed air, blow out all visible areas of the Printer
interior. (Note: Remove any debris that may be inside.)
OR
If you do not have a can of compressed air, use a cleaning pad from the
Printer Cleaning Kit to wipe out all visible areas inside the Printer. (Note:
Remove any debris that may be inside.)
Caution: Be extremely careful not to let any alcohol drip inside the
Printer!
4 Re-install the printing supplies.
5 Close the Front Cover.
Cleaning outside the Printer
To Next Page
Loading...
