HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
276
Mag HI-Co Voltage offset
This allows for adjusting the voltage to the Mag Head. This affects the amplitude and quality of the
magnetic data encoded on the hi-co mag srtipe.
Mag Lo-Co Voltage Offset
This allows for adjusting the voltage to the Mag Head. This affects the ampltude and quality of the
magnetic data encoded on the lo-co mag stripe.
Mag Flipper Angle Offset
This allows for adjusting the flipper angle when using the magnetic encoder.
Reviewing the No Printer Connected error message
If there is no Printer connected or if the Driver is unable to communicate with the Printer, the
following error will be displayed and the grid will be blank.
Reviewing the Value outside the Range error message
If typing a value outside the range, an error message will display specific to the setting when
leaving the spin control to click any other spin control, button or tab.
To Next Page
Loading...
