HID HDPii - Using the Character Parity dropdown list

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
217
1
• Select No LRC to change the LRC Generation to none.
OR
• Select Even Parity to change the LRC Generation to Even Parity.
(Note: This is the default for all tracks.)
OR
• Select Odd Parity to change the LRC Generation to Odd Parity.
Using the Character Parity dropdown list
Use this option to customize the Encoding Mode (used to encode the Magnetic data on the
currently selected track).
Step Procedure
1
• Select No Parity to change the Encoder Mode to none.
OR
• Select Even Parity to change the Encoder Mode y to Even Parity.
OR
• Select Odd Parity to change the Encoder Mode to Odd Parity. (Note:
This is the default for all tracks.)