HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
191
Adjusting for the Resin Dither
Select the appropriate dither method according to the type of image to be printed. (Note:
This option only affects those objects printed on the backside of a card with the resin black
panel of a YMCK or YMCKK Print Ribbon. This is only enabled when using at least one K
panel and dual sided enabled, splitting one set of panels.)
Step Procedure
1
Select Optimized for Graphics when printing lower quality images (e.g.,
clipart, logos, etc.) with resin.
OR
Select Optimized for Photo when printing photo quality images with resin.
To Next Page
Loading...
