HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
133
choices are log1 or log2).
3
Select the UDP Syslog radio button.
4 Enter a valid IP address or domain name.
5
Select Submit.
6
Login as a root User if you are so prompted. (Note: Any change of setting
will only be accepted after you have successfully logged in.)
Specifying TCP Event Logging
Follow this procedure to send logging messages to a pre-existing IP connection made on the
TCP port.
Step
rocedure
1
Select the System Log link.
To Next Page
Loading...
