HID HDPii - Using the Resin Heat Adjust Option; Using the Sleep Time Option; Using the Standby Time Option

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
274
Using the Resin Heat Adjust Option
Use this adjustment for Black resin text and barcodes appear faded or too light/dark.
Using the Sleep Time Option
This setting adjusts the time until printer stops energizing the transfer roller conserve energy.
A setting of “0” will disable. (Note: The counter for this setting starts after Standby Time has
elapsed.)
Using the Standby Time Option
This setting adjusts the time until printer goes into a reduced transfer roller temp to conserve
energy. (Note: A setting of “0” will disable. Settings are in minutes.)
Using the Blush Point Option
The blush point is compensation during printing:
• There is no dye transfer.
• There is no a light gray line on a portion of the card.
• It should be white.