HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
146
Using the Help page
The Help page displays the Help information.
Step Procedure
1 Open this web page at the appropriate location by clicking on the Help book
icon at the top of each page. See the previous procedure.
2 Review the web interface for the Ethernet-enabled Printer.
Additional Procedures
Accessing the Ethernet Status LED
The Ethernet Status LEDs can be found on the back of Printers.
Reviewing the HDPii LED Table
LED Flash Rate Indicates
Green LED
(Left)
On The Network link is present.
Off The Network link is not present.
Amber LED
(Right)
Off There is NO network traffic to this IP address.
Blinking There is Network traffic to this IP address.
To Next Page
Loading...
