HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
190
Step Procedure
3 Control the amount of heat the Printer uses when printing with the resin black
panel by adjusting the Resin Heat slide.
• Move the slide to the left to cause less heat to be used in the printing
process, causing resin images to be lighter or less saturated.
OR
• Move the slide to the right to cause more heat to be used, causing resin
images to be darker or more saturated.
(Note: This control can be helpful for fine-tuning the sharpness of resin text
and bar codes.)
Step Procedure
4 As needed, return all options to their factory settings by clicking on the
Default button.
To Next Page
Loading...
