HID HDPii - Page 201

HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
201
Step Procedure
1 Transfer Dwell Time Sets dwell time for intm transfer in seconds per inch
Lower limit = 1.0 seconds per inch, Upper limit = 3.0 seconds per inch
• UltraCard III - Composite: Default = 2.0 seconds per inch
• UltraCard - PVC: Default = 2.0 seconds per inch
2 Transfer Temperature Sets temperature for intm transfer in Celsius Lower
limit = 150.0 Celsius, Upper limit = 190.0 Celsius
• UltraCard III - Composite: Default = 175.0 seconds per inch
• UltraCard- PVC: Default = 175.0 Celsius
f