HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
281
Step Procedure
1
From the HDPii Driver, click on the Toolbox button to bring up the Clean
Printer tab.
2 Follow the instructions from the Clean Printer tab on the Driver. See Display A
below.
(Note: If your Printer is equipped with a Magnetic Encoder, you must insert
the Cleaning Card with the printed side up and with a small Liner Strip
towards the front of the Printer. See Display B below)
3 After the cleaning process is completed, the Cleaning Card will exit the Printer
at the Input Hopper.
4 Replace the printing supplies and close the Print Stations after the Rollers are
clean and completely dry.
Display A – Clean Printer window
To Next Page
Loading...
