ZMU05564
TIP:
Inspect ground leads attached to external
anodes on equipped models. Consult a
Hidea dealer for inspection and replace-
ment of internal anodes attached to the
pow- er unit.
HD29323
Checking battery (for electric start
models)
EWM01902
poisonous and caustic, and
batteries
generate
explosive hydrogen gas. When
working
near
the
battery:
Wear protective eye gear and
rubber gloves.
Do not smoke or bring any
other source of ignition near the
battery.
The procedure for checking the battery var-
ies for different batteries. This procedure
contains typical checks that apply to many
batteries, but you should always refer to the
battery manufacturer’s instructions.
ECM01920
NOTICE
A poorly maintained battery will quickly
deteriorate.
1. Check the electrolyte level.
2. Check the battery’s charge. If your boat
is equipped with the digital speedome-
ter, the voltmeter and low battery alert
functions will help you monitor the bat-
tery’s charge. If the battery needs
charg- ing, consult your Hidea dealer.
3. Check the battery connections. They
should be clean, secure, and covered
by an insulating cover. WARNING! Bad
connections can produce shorting or
arcing and cause an explosion.
[EWM01912]
HD29334
Connecting the battery
EWM00572
Mount the
battery
holder
securely
in
a
dry, well-ventilated, vibration-free loca-
tion in the boat. Install
a
fully charged
bat-
tery
in the holder.
84
To Next Page
Loading...
Need help?
General
