Flushing device
This device is used to clean the cooling wa-
ter passages of the motor using a garden
hose and tap water.
1. Power tilt unit
2. Power tilt motor
NOTICE
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt
sup- port and fall. If the motor cannot be
trail- ered in the normal running
position, use an additional support
device to secure it in the tilt position.
Cowling lock lever (pull up type)
To remove the engine top cowling, pull up
the cowling lock lever(s) and lift off the
cowl- ing. When installing the cowling,
check to be sure it fits properly in the rubber
seal. Then lock the cowling by moving the
cowling lock lever(s) downward.
1. Flushing device
TIP:
For details on usage, see page 70.
Alert indicator
If the engine develops a condition which is
cause for alert, the indicator lights up. For
details on how to read the alert indicator,
see page 35.
1. Alert indicator
33
To Next Page
Loading...
Need help?
General
