Hidea F15 User Manual

Specifications and requirements
(20 HP@5500 r/min)
F20FE/T 14.7 kW@5500 r/
min (20 HP@5500 r/min)
F20HE/T 14.7 kW@5500
r/min (20 HP@5500 r/min)
Idle speed (in neutral):
1050 50 r/min
Engine:
Type:
4-stroke L
Displacement:
362.0 cm
3
Bore  stroke:
63.0  58.1 mm (2.48  2.29
in)
Ignition system:
CDI
Spark plug with resistor
(NGK): DPR6EB-9
Spark plug gap:
0.8–0.9 mm (0.031–0.035 in)
Control system:
F15HE Tiller handle
F15H Tiller handle
F15HE/T Tiller handle
F20FE Remote control
F20EHA Tiller handle
F20HE Tiller handle
F20FE/TRemotecontrol
F20HE/TTiller handle
Starting system:
F15HE Electric starter
F15H Manual starter
F15HE/T Electric starter
F20FE Electric starter
F20EHA Electric starter
F20HE Manual starter
F20FE/T Electric starter
F20HE/T Electric starter
Starting carburetion system:
Prime start
Valve clearance (cold engine) IN:
0.15–0.25 mm (0.0059–0.0098 in)
Valve clearance (cold engine) EX: 0.25–
0.35 mm (0.0098–0.0138 in)
Min. cold cranking amps (CCA/SAE):
F15HE 245.0 A
F15HE/T 245.0 A
F20FE245.0 A
F20EHA 245.0 A
F20FE/T 245.0 A
F20HE/T 245.0 A
Min. marine cranking amps (MCA/ABYC):
F15HE 323.0 A
F15HE/T 323.0 A
F20FE323.0 A
F20EHA 323.0 A
F20FE/T 323.0 A
F20HE/T 323.0 A
Min. reserve capacity (RC/SAE):
F15HE 52 minutes
F15HE/T 52 minutes
F20FE52 minutes
F20EHA 52 minutes
F20FE/T 52 minutes
F20HE/T 52 minutes
Maximum generator output:
10 A
Drive unit:
Gear positions:
Forward-neutral-reverse
Gear ratio:
F15HE 2.08(27/13)
F15H 2.08(27/13)
F15HE/T 2.08
(27/13)
F20FE2.08(27/13)
F20EHA 2.08(27/13)
F20HE2.08(27/13)
F20FE/T 2.08(27/13)
F20HE/T 2.08(27/13)
Trim and tilt system:
F15HE Manual tilt
F15H Manual tilt

Hidea F15 Specifications

General

Brand	Hidea
Model	F15
Category	Outboard Motor
Language	English