3. Primer pump
4. Toward the fuel tank
4. Align the groove in the fuel joint on the
outboard motor with the protrusions on
the fuel hose.
1. Air vent screw
2. Remove the fuel joint cap on the out-
board motor.
1. Fuel joint cap
1
1. Fuel joint
2. Groove
3. Protrusion
4. Fuel hose
5. Push in the fuel hose and turn it clock-
3. Check the direction of the fuel hose.
Make sure that the arrow of the primer
pump points toward the outboard
motor.
wise to connect it securely.
1 3
4
ZMU07452
1. Fuel hose
1. Toward the outboard motor
2. Arrow
6. Align the groove in the fuel joint on the
fuel tank with the protrusions on the fuel