Appendix A
Studio Command™ DMX Protocol
Studio Command Series User Manual 79
Note 1: The pan and tilt coarse channels set the center position of the position
macro. The Mspeed channel is used to control the speed of the macros
With the Mspeed set at the default value of DMX 0-4 all internal effects
complete moves at approximately 2.5 seconds. This provides a pleasing
look for those customers that do not want the additional variation given
by using the Mspeed channel.
With the Mspeed set between DMX 5-255 all internal effects complete
moves at the selected Mspeed time (up to 25 seconds).
Those fixture types that support On Board Programming also support the
Internal Effects as part of the On Board programming features. The
Internal Effects will operate as an additional programming parameter
labeled MACR.
To Next Page
Loading...