HIKVISION DS-6900UDI Series User Manual

DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manua l
46
Configure Time Settings
Configure the time synchronization by NTP server or manually.
 Configuring Time Synchronization by NTP Server
A Network Time Protocol (NTP) Server can be configured on your device to ensure the
accuracy of system date/time.
If the device is connected to a Dynamic Host Configuration Protocol (DHCP) network that
has time server properties configured, the camera will synchronize automatically with the
time server.
Enable the NTP function by selecting the radio button, and configure the following
settings:
NTP Server: IP address of NTP server.
NTP Port: Port of NTP server.
Configure Time by NTP
If the device is connected to a public network, you should use a NTP server that has a time
synchronization function, such as the server at the National Time Center (IP Address:
210.72.145.44). If the device is set up in a more customized network, NTP software can be
used to establish a NTP server used for time synchronization.
 Configuring Time Synchronization Manually

HIKVISION DS-6900UDI Series Specifications

General

Brand	HIKVISION
Model	DS-6900UDI Series
Category	Media Converter
Language	English