HIKVISION DS-6900UDI Series User Manual

DS-6900UDI Series HD Video and Audio Decoder User Manual
DS-6900UDI Decoder Us er Manua l
77
Check the checkbox of Enable Ship Detection to enable the function.
Check the checkbox of Display Detection Frame on Video to display the frame and alarm
line on stream.
Input the device height in the textbox as the height of device above the water level.
Draw the ship detection area and the alarm lines.
1. Click Draw Area button. Click the mouse on the live view image to draw a ship detection
area and right-click to finish drawing. The alarm will be uploaded when ship is detected in
this area.
2. Click Draw Alarm Line button. Click the mouse on the live view image to draw an alarm
line and right-click to finish drawing. The device alarms and counts the ship number when
ships are detected in the area and the ship information will be displayed on the right.
Make sure the alarm line is longer than the width of ship detection area.
3. Click Recount to start counting the ships detected in the area afterwards.
Check the checkbox to select the linkage method taken for the alarm input.
Click Save to save the settings.
Configuring VCA
Configure the live view parameters to enable rules.
1. Click Configuration > Local Configuration to enter the Local Configuration interface.
Local Configuration

HIKVISION DS-6900UDI Series Specifications

General

Brand	HIKVISION
Model	DS-6900UDI Series
Category	Media Converter
Language	English