HIKVISION DS-7200-SH Series User Manual

User Manual of DS-7200-SH/SV&DS-7300-SH Series DVR
121
• NO-IP:
Enter the account information in the corresponding fields. Refer to the DynDNS settings.
1) Enter Server Address for NO-IP.
2) In the Device Domain Name text field, enter the domain obtained from the NO-IP website
(www.no-ip.com).
3) Enter the User Name and Password registered in the NO-IP website.
Figure 9.9 NO-IP Settings Interface
• hkDDNS: You need to enter the Server Address and Device Domain Name for hkDDNS, and
other fields are read only.
1) Enter the Server Address of the hkDDNS server: www.hik-online.com.
2) Enter the Device Domain Name. You can register the alias of the device domain name in
the hkDDNS server first and then enter the alias to the Device Domain Name in the DVR;
you can also enter the domain name directly on the DVR to create a new one.
Note: If a new alias of the device domain name is defined in the DVR, it will replace the old
one registered on the server.
Figure 9.10 hkDDNS Settings Interface
Register the device on the hkDDNS server.
1) Go to the hkDDNS website: www.hik-online.com.
2) Click to register a user account if you do not have one.
3) After registration is successful, use the account and password to log in.

HIKVISION DS-7200-SH Series Specifications

General

Brand	HIKVISION
Model	DS-7200-SH Series
Category	DVR
Language	English