HIKVISION DS-7200-SH Series User Manual

User Manual of DS-7200-SH/SV&DS-7300-SH Series DVR
19
The rear panels of DS-7300HFI-SH and DS-7300HWI-SH DVR are shown in Figure 1.8, Figure 1.9 and
Figure 1.10
1
2
3 4 6 8 9 10 15
5
7 11 12 13 14
Figure 1.8 Rear Panel of DS-7304HFI-SH and DS-7304HWI-SH
1 2 3 4 6 8 9 10 1511
12 13 14
5 7
Figure 1.9 Rear Panel of DS-7308HFI-SH and DS-7308HWI-SH
1 2
3 45 6
7 8
9
10 11
12
13 14
15
Figure 1.10 Rear Panel of DS-7316HFI-SH and DS-7316HWI-SH
Table 1.7 Description of Rear Panel
No.
Item
Description
1
VIDEO IN
BNC connector for analog video input.
2
MAIN VIDEO OUT
BNC connector for video output.
SPOT VIDEO OUT
BNC connector for spot video output.
3
HDMI
HDMI video output.
4
USB Interface
Connects USB mouse or USB flash memory devices.
5
RS-232
Connector for RS-232 devices.
6
VGA
DB15 connector for VGA output. Display local video output and menu.
7
AUDIO IN
RCA connector for audio input.
8
AUDIO OUT
RCA connector for audio output.
9
LAN Interface
RJ45 10M / 100M / 1000M Ethernet interface.
10
RS-485 Interface
Connector for RS-485 devices. Connect the D+ and D- terminals to R+ and
R- terminals of PTZ receiver respectively.
11
Alarm In/Out
Connector for alarm input/output.
12
eSATA
Connects external SATA HDD, DVD-R/W.
13
110~240VAC
12VDC power supply.
14
POWER
Switch for turning on/off the device.
15
GND
Ground(needs to be connected when DVR starts up)

HIKVISION DS-7200-SH Series Specifications

General

Brand	HIKVISION
Model	DS-7200-SH Series
Category	DVR
Language	English