User Manual of Digital Video Recorder
137
Figure 8. 4 Set Trigger Camera of Motion Detection for HDVR Series
Triggering IP Camera is supported by HDVR series only.
4. Set arming schedule of the channel.
Select Arming Schedule tab and set arming schedule of the channel.
Choose one day of a week and up to eight time periods can be set within each day. Set up arming schedule
of other days of a week. You can also click the button Copy to copy an arming schedule to other days.
Click Apply to save the settings.
Time periods cannot be repeated or overlapped.
Figure 8. 5 Set Arming Schedule of Motion Detection
5. Click Linkage Action tab to set alarm linkage actions of motion detection (please refer to Chapter 8.7).
Figure 8. 6 Set Alarm Linkage Actions of Motion Detection
Upload captured pictures to FTP is only supported by DVR series.
Click Apply to save the settings. Click OK to complete the motion detection settings of the channel.
To Next Page
Loading...
Need help?
General