User Manual of Digital Video Recorder
50
3.3 Adjusting Live View Settings
Purpose:
Live View settings can be customized to meet different needs. You can configure the output interface, number
of display window, dwell time for screen display, audio output settings, etc.
We use the interface of DS-9100HFI-ST series (unless otherwise stated) as the example to describe the
following settings.
Steps:
1. Enter the Live View Settings interface.
Menu> Configuration> Live View
Figure 3. 10 Live View-General
The settings available in this menu include:
• Video Output Interface: Designates the output to configure the settings for. The interfaces
include HDMI (depends on the model), VGA, Main CVBS and Spot Output.
• Live View Mode: Designates the display mode to be used for Live View.
• Dwell Time: The time in seconds to dwell between switching of channels when enabling
auto-switch in Live View.
• Enable Audio Output: Enables/disables audio output for the selected video output.
• Volume: Adjust the volume of live view, playback and two-way audio for the selected output
interface.
• Event Output: Designates the output to show event video.
• Full Screen Monitoring Dwell Time: The time in seconds to show alarm event screen.
2. Setting Camera Order
To Next Page
Loading...
Need help?
General