User Manual of Digital Video Recorder
148
8.6 Handling Exceptions
Purpose:
Exception settings refer to the handling method of various exceptions, e.g.
HDD Full: The HDD is full.
HDD Error: Writing HDD error, unformatted HDD, etc.
Network Disconnected: Disconnected network cable.
IP Conflicted: Duplicated IP address.
Illegal Login: Incorrect user ID or password.
Video Signal Exception: Unstable video signal.
Input / Output Video Standard Mismatch: I/O video standards do not match.
Record / Capture Exception: No space for saving recorded files or captured images.
Array Exception: Abnormal virtual disks under array.
Hot Spare Exception: For the working device, the exception occurs when the hot spare device is
disconnected; for the hot spare device, the exception occurs when the working device is offline.
Input / Output Video Standard Mismatch and Video Signal Exception are not supported by IP cameras of
HDVR series.
Array Exception is only supported by DS-9100/9000HFI-RT series.
Hot Spare Exception is only supported by HDVR series.
Steps:
1. Enter Exceptions interface and handle various exceptions.
Menu> Configuration> Exceptions
2. Check the checkbox of Enable Event Hint to display the Event/Exception icon when the
exceptional event occurs. And click the icon to select the detailed event hint for display.
Click the icon appears in the live view interface, and you can view the detailed information of the
exceptional event. Click the button Set, and then you can select the detailed event hint for display.
Figure 8. 23 Detailed Event
To Next Page
Loading...
Need help?
General