User Manual of Digital Video Recorder
239
14.5 Managing User Accounts
Purpose:
There is a default account in the device: Administrator. The Administrator user name is admin and the password is
12345. The Administrator has the permission to add and delete user and configure user parameters.
14.5.1 Adding a User
Steps:
1. Enter the User Management interface.
Menu > Configuration > User
Figure 14. 6 User Management Interface
2. Click Add to enter the Add User interface.
Figure 14. 7 Add User Menu
3. Enter the information for new user, including User Name, Password, Level and User’s MAC Address.
Level: Set the user level to Operator or Guest. Different user levels have different operating permission.
• Operator: The Operator user level has permission of Local Log Search in Local Configuration,
Remote Log Search and Two-way Audio in Remote Configuration and all operating permission in
Camera Configuration.
To Next Page
Loading...
