User Manual of Digital Video Recorder
199
11.2 Managing Network HDD
Purpose:
You can add the allocated NAS or disk of IP SAN to device, and use it as network HDD.
Steps:
1. Enter the HDD Information interface.
Menu > HDD > General
Figure 11. 7 HDD Information Interface
2. Click Add to enter the Add NetHDD interface.
Figure 11. 8 Adding NetHDD Interface
3. Add the allocated NetHDD.
4. Select the type to NAS or IP SAN.
5. Configure the NAS or IP SAN settings.
Add NAS disk:
1) Enter the NetHDD IP address in the text field.
To Next Page
Loading...
