User Manual of Digital Video Recorder
159
Prior registration with your ISP is required before configuring the system to use DDNS.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the DDNS tab to enter the DDNS Settings interface.
Figure 9. 9 DDNS Settings Interface
3. Check checkbox to enable DDNS.
4. Select DDNS Type. Five different DDNS types are selectable: IPServer, DynDNS, PeanutHull, NO-IP
and HiDDNS.
• IPServer: Enter Server Address for IPServer, and other fields are read only.
The Server Address should be the IP address of the PC that runs IPServer.
Figure 9. 10 IPServer Settings Interface
• DynDNS:
1) Enter Server Address for DynDNS (e.g. members.dyndns.org).
2) In the Device Domain Name text field, enter the domain obtained from the DynDNS website.
3) Enter the User Name and Password registered in the DynDNS website.
Figure 9. 11 DynDNS Settings Interface
• PeanutHull: Enter User Name and Password obtained from the PeanutHull website, and other
fields are read only.
To Next Page
Loading...
Need help?
General