User Manual of Digital Video Recorder
207
Figure 11. 23 Copy Settings to Other Camera(s) for HDVR Series
IP Camera is supported by HDVR series only.
6. Select the camera (s) to be configured with the same quota settings. You can also click the checkbox of
Analog or IP Camera to select all cameras.
7. Click OK to finish the Copy settings and back to the Storage Mode interface.
8. Click Apply to save the settings.
The device must be rebooted to activate the changes.
If the quota capacity is set to 0, then all cameras will use the total capacity of HDD for record and picture
capture.
To Next Page
Loading...
Need help?
General