User Manual of Digital Video Recorder
221
Figure 12. 7 Image Settings Interface for IP Camera
The defog mode is only available for analog cameras connected to DS-9200 HWI-ST series device.3
types of defog modes are available: Auto (default), Manual and Disable.
IP Camera is supported by the HDVR series.
2. Select the camera to set image parameters.
3. Select the mode from the drop-down list of Mode. For analog cameras, four modes are selectable: Standard,
Indoor, Dim Light and Outdoor. While for IP cameras, only Customize is supported.
4. Adjust the image parameters according to actual needs. The parameters are including Brightness, Contrast,
Saturation, Hue, Sharpness and Denoising. You can also click Default to restore the default settings.
Sharpness, Denoising and restoring default settings are not supported by IP cameras.
5. You can click Copy to copy the image settings of the current camera to other analog cameras.
Copying the image settings to IP cameras is not available.
6. Click Apply to save the settings.
To Next Page
Loading...
Need help?
General