User Manual of Digital Video Recorder
80
Figure 5. 30 Continuous Recording
Figure 5. 31 Motion Detection Recording
2) Click Yes to enable all-day continuous recording or all-day motion detection recording of all
channels.
5. Enabling and disabling the continuous capture.
1) Select Continuous Capture tab on the left bar.
Figure 5. 32 Continuous Capture for DVR Series
Figure 5. 33 Continuous Capture for HDVR Series
IP Camera is supported by HDVR series only.
2) Click the status button before camera number to change to to enable continuous capture.
3) Or click the status button to change to to disable continuous capture.
After rebooting, all the continuous capture will be canceled.
To Next Page
Loading...
Need help?
General