HIKVISION DS-A81024S/192 - Repair Array; Rename Array; Delete Array

Storage System User Manual
23
3.2.5 Repair Array
Purpose:
You can repair the data bit and parity data mismatch issue.
If array in storage pool starts repairing, physical volume status is repairing.
Steps:
1. Click Maintenance of a degraded array in the array list.
2. Click Repair to start repairing.
3.2.6 Rename Array
Steps:
1. Click Maintenance of an array in the array list.
2. Click Rename.
3. Enter a new name.
4. Click OK to save the new name.
3.2.6.1 Modify I/O Priority
Steps:
1. Click Maintenance of an array in the array list.
2. Click Modify.
3. Select I/O Priority.
4. Click OK.
3.2.6.2 Pause Initialization/Rebuilding/Detection/Repair
Purpose:
When the array is initializing, rebuilding, detecting, or repairing, you can pause.
Steps:
1. Click Maintenance of an array in the array list.
2. Click Pause to pause current process.
3. You can click Keep to resume.
3.2.7 Delete Array
Steps:
1. Select an array to delete.
2. Click Delete.
If the array has been added to a storage pool, you need to remove it from storage pool first, or it can’t be deleted.