HIKVISION DS-A81024S/192 User Manual

Storage System User Manual
67
Bond Mode
Description
Tlb
 Definition: The storage system allocates output traffic to each data network
interfaces, according to current load. And transmits data to clients via different
data network interfaces. If the working data network interface fails, another data
network interface takes over the task.
 Advantage:
 Data network interfaces are fully used.
 Load balance when sending data.
 Disadvantage: Load balance isn’t supported when receiving data.
Virtualization
 Definition:
 The storage system allocates input and output traffic to each data network
interfaces, according to current load.
 It is recommended to use the mode when sending and receiving data to
multiple clients.
 Advantage:
 Data network interfaces are fully used.
 Load balance in both sending and receiving data.
8.2.5.3 Network Work Speed
Purpose:
It is the speed of all data network interfaces. The default network work speed is 100 Mb/s. It is recommended to
set network work speed according to actual network situation.
Steps:
1. Go to System > Network.
2. Click Modify of Network Word Speed.
3. Select Network Work Speed as 1000 Mb/s or 100 Mb/s.
4. Click OK to save the settings.
8.3 Alarm
Purpose:
The storage system supports notifying you about the occurring alarms via email and SMTP manager.
8.3.1 Alarm Type
Purpose:
The Table 8. 3 Alarm Type Description describes the supported alarm types and corresponding event level. E-mail
and SNMP manager support notifying you about the alarm types in Table 8. 3.
Table 8. 3 Alarm Type Description

HIKVISION DS-A81024S/192 Specifications

General

Brand	HIKVISION
Model	DS-A81024S/192
Category	Storage
Language	English