HIKVISION DS-A81024S/192 - System Alarm; Hybrid SAN Version

Storage System User Manual
58
6.8.2 System Alarm
Purpose:
You can set linkage actions for alarm type, specify alarm type for alarm events, and turn on or turn off status alarm.
Steps:
1. Go to System Config > System Alarm.
2. Alarm type includes Info (Information), Warning, Error, and Fatal. Specify 3 linkage actions for the 4 alarm
types.
Alarm Setting
3. Specify alarm type for alarm events.
Alarm Events
4. Turn on or turn off status alarm.
Status Alarm
5. Click Submit to save the settings.
6.8.3 Hybrid SAN Version
Purpose:
In System Config > Version, you can view Hybrid SAN version, Hybrid SAN library version, etc.