Storage System User Manual
72
8.5 Tool
8.5.1 Modify Password
Purpose:
You can modify password for basic management system and CVR sub-system user.
Steps:
1. Go to System > Tool.
2. Click Modify password.
3. Select User Name as web_admin or nvr_admin.
web_admin: Basic management system user name.
nvr_admin: Hybrid SAN sub-system user name.
4. Enter Old Password, New Password and Confirm Password.
The security level of modified password shouldn’t be lower than low security.
Password can only contain numbers, lowercase, uppercase, and underline for your password.
Modify Password
5. Click OK to save the new password.
Once password is modified, it jumps to login interface. You need to enter the new password to log in.
8.5.2 SNMP Configuration
Purpose:
By configuring SNMP parameters, you can log in PRTG Traffic Grapher tool to monitor the system status, including
exception information, CPU usage, and so forth.
Steps:
1. Go to System > Tool.
2. Click SNMP Configure.
To Next Page
Loading...
