Storage System User Manual
48
Update Duplicate Device: When the contents of HOST and CHANNEL column of several encoding
devices are the same, CVR judges them as duplicate encoding device. If it is selected, CVR would add all
of the duplicate encoding devices and update the previous encoding devices’ parameters. Or duplicated
wouldn’t be added.
Update encoding device with the same name: If selected, when encoding devices in CVR sub-system
and importing file share the same name, once imported, the encoding devices in importing file would
replace the one in CVR sub-system.
Auto link record volume: If selected, when encoding devices in importing file have no linked record
volume, once imported they would link to the first record volume in CVR sub-system.
Auto Rename: If selected, when duplicated name exists during add and modifying, the name of added
encoding devices would be renamed as “previous name _1”.
4. Click OK to import. The encoding device list would be updated according to imported file.
Import
6.4 Preview and Record
Purpose:
You can start or stop recording manually in Preview and Record > Encoding Device.
Preview and Record
To start or stop manual recording for specified encoding devices, do following steps:
1. Select encoding device(s) to record.
2. Click Turn on videos to start recording. And you can click turn off videos to stop recording.
To start or stop manual recording for all encoding devices, do following step:
Click Turn on All to start recording for all. And you can click Turn off All to stop recording for all.
If the encoding device is recording according to record schedule, click Stop recording or All stop wouldn’t stop
recording, for record schedule would start recording again. For schedule details, refer to 6.5 Strategy and Alarm.
To Next Page
Loading...
Need help?
General
